Industries
Fastener testing — mechanical properties and hardness
The fastener industry is one of the four industries the company names as its focus. The published product range includes servo-controlled universal testing machines for the tensile, compression, bending and shear testing of metal specimens, and Rockwell hardness testers for the hardness testing of metals, together with specimen preparation equipment.
What makes this industry hard
Materials testing and hardness testing equipment for fastener production and incoming inspection.
Mechanical properties come first
Tensile, proof-load and bending tests on bolts, screws and studs are the routine evidence for a production lot, and they need a machine whose capacity and accuracy match the size range being produced.
Hardness is a separate traceable chain
Hardness testing follows its own standard family, and the scale, test force and indenter have to match the specification being checked.
What we provide
What we provide
The fastener industry is one of the four industries the company names as its focus. The published product range includes servo-controlled universal testing machines for the tensile, compression, bending and shear testing of metal specimens, and Rockwell hardness testers for the hardness testing of metals, together with specimen preparation equipment.
Universal testing machines
Single-column, dual-column tabletop and dual-column floor-standing servo machines from 1 kN to 500 kN, 0.5 class force sensor, load accuracy ≤ ±0.5 %, force resolution up to 1/1,000,000.
Rockwell hardness testers
Models HR-150A (manual loading) and HR-150DT (motorised loading): 10 kgf (98.07 N) initial test force, 60 / 100 / 150 kgf test forces, HRA / HRB / HRC scales, maximum specimen height 170 mm.
Specimen preparation
Abrasive cut-off machines with a dual quick-clamp vice, recirculating coolant and overload protection, for preparing metal specimens before testing.
Laboratory services
Laboratory planning and operator training, plus instrument calibration and maintenance.
Equipment for this industry
Equipment for this industry
Each machine below is documented on its own page with its published specification.
Materials testing
Servo-Controlled Universal Testing Machine
Single-column, dual-column tabletop or floor-standing servo machines from 1 kN to 500 kN, for metals, plastics, rubber, composites and finished parts.
Standards covered by our published equipment descriptions
Standards covered by our published equipment descriptions
These are the standard numbers that appear in the published product descriptions for this industry.
- GB/T 230.2
- ISO 6508
- ASTM E-18
- GB
- ISO
- JIS
- ASTM
- DIN
Standard numbers are reproduced as published. Confirm the current revision and the test items for your programme.
Questions buyers ask
Questions buyers ask
- Which capacity should be specified?
- The published series spans 1 kN to 500 kN across single-column, tabletop and floor-standing builds, and the capacity is selected against the specimen strength and size. [TO CONFIRM: the specimen range for your production, so the capacity can be fixed.]
- Are the test methods limited to one standard system?
- No. The published description states that the systems meet the relevant GB, ISO, JIS, ASTM and DIN test methods, and the hardness testers list GB/T 230.2, ISO 6508 and ASTM E-18.
Still to be confirmed
Request a quote
Materials testing and hardness testing equipment for fastener production and incoming inspection.